Tribute 2WD L4-2.5L (2009)
5. Remove the 5 screws and carefully remove the leadframe from the solenoids by lifting it straight up evenly.
CAUTION:Be careful not to bend or twist the solenoid body leadframe or the solenoid terminals when removing the leadframe or damage can occur to
the leadframe or the solenoids.
6. Using a paint marker, number the solenoids and the solenoid body to correspond with the ports from which the solenoids are located in the
solenoid body.
CAUTION:The solenoids are calibrated from the factory and are not all the same. Failure to mark the solenoids to the ports they were originally in can
result in mixing the solenoids and can cause damage to the transaxle or a harsh shift.
7. Remove the solenoid retaining pins.
8. Remove the solenoids from the solenoid body.
Assembly