Tribute 2WD L4-2.5L (2009)
10. Install Overdrive Clutch and Balance Piston Service Set and 2-6 Spring Compressor on the direct (3, 5, R) clutch cylinder. Using a press,
compress the direct (3, 5, R) clutch piston return spring, and install the snap ring.
CAUTION:Only compress the direct clutch piston return spring far enough to take the tension from the direct clutch cylinder off the snap ring. If the
piston is compressed too far, the piston alignment tab may be broken off.
11. Remove Overdrive Clutch and Balance Piston Service Set and 2-6 Spring Compressor.
12. Install 2 new seals on the O/D (4, 5, 6) clutch piston and lubricate the seals with petroleum jelly.
