Tribute 2WD L4-2.5L (2009)
b. Disconnect the mass air flow (MAF) sensor electrical connector.
c. Disconnect the brake booster vacuum hose from the ACL outlet pipe.
d. Detach the wiring harness fastener from the ACL assembly.
e. Disconnect the engine breather from the ACL assembly.
f.
Loosen the ACL outlet pipe clamp at the throttle body (TB) and remove the ACL and ACL outlet pipe assembly.
3. Disconnect the selector lever cable end from the manual control lever.
4. Remove the transaxle fluid drain plug and allow the transaxle fluid to drain.
