Tribute 2WD L4-2.5L (2009)
1. Remove the air cleaner (ACL) assembly.
a. Remove the ACL assembly bracket bolt.
b. Disconnect the mass air flow sensor (MAF) sensor electrical connector.
c. Disconnect the brake booster vacuum hose from the ACL outlet pipe.
d. Detach the wiring fastener from the ACL assembly.
e. Disconnect the engine breather from the ACL assembly.
f.
Loosen the ACL outlet pipe clamp at the throttle body (TB) and remove the ACL and ACL outlet pipe assembly.
2. Install the Engine Support Bar, Support Leg and Adapters.