Tribute 2WD L4-2.5L (2009)
6. Remove the 2 bolts from the lower front insulator and remove the lower front insulator.
Installation
1. Install a new lower front insulator onto the cross brace and install the lower front insulator cross brace bolts.
-
Tighten to 115 Nm {11.7 kgf-m, 85 ft-lbf}.
2. Position the cross brace in place and install the nut.
-
Tighten to 175 Nm {17.8 kgf-m, 129 ft-lbf}.
3. Install the 2 bolts for the cross brace.
-
Tighten to 90 Nm {9.1 kgf-m, 66 ft-lbf}.
