Tribute 2WD L4-2.5L (2009)
Seals and Gaskets: Service and Repair
-
HALFSHAFT SEAL - RH, FRONT WHEEL DRIVE (FWD) REMOVAL/INSTALLATION
Removal
1. With the vehicle in NEUTRAL, position it on a hoist. See See: Maintenance/Vehicle Lifting/Service and Repair/Lifting.
2. Remove the front RH halfshaft. See See: Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and Repair/Front Axle / Front Drive
Halfshafts Removal/Installation.
3. Using a suitable awl, poke a small hole in the halfshaft seal.
4. Using a suitable dent puller, remove the halfshaft seal.
Installation
