Tribute 2WD L4-2.5L (2009)
Shift Cable: Adjustments
GEARSHIFT CABLE ADJUSTMENT
1. Separate the shift boot from the floor console finish panel. Rotate the gearshift knob counterclockwise and remove the knob and boot as an
assembly.
2. Carefully pry the floor console finish panel from the floor console.
3. Disengage the secondary shift cable lock by sliding it away from the shifter ball stud.
4. Disengage the primary shift cable lock by sliding it out away from the shift cable.
NOTE:If the primary shift cable lock is difficult to slide out, disconnect the shift cable from the ball stud, push the primary lock from the rear, and
reattach the shift cable to the ball stud.