Tribute 2WD L4-2.5L (2009)
10. Remove the 3rd main gear, 2nd main gear, 2nd gear needle bearing, 2nd gear bushing, 1st and 2nd gear synchronizer assembly, 1st and 2nd gear
synchronizer rings, 1st main gear, reverse main gear, 1st gear needle bearing and 1st gear bushing together.
-
Discard the 3rd main gear, the reverse main gear, and the 1st and 2nd gear synchronizer assembly.
11. Inspect all mainshaft parts for damage, peeling, dents, uneven wear or bending. Install new parts as necessary.
12. Inspect the synchronizer rings for damage. Install new parts as necessary.