mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Seals and Gaskets, M/T|Service and Repair|Page 4457 > < Reverse Idler Gear|Service and Repair|Page 4453
Page 1
background image

Seals and Gaskets: Service and Repair

HALFSHAFT OIL SEAL REMOVAL/INSTALLATION

CAUTION:New halfshaft oil seals should be installed anytime the halfshafts are removed. Failure to install new halfshaft seals may result in transaxle
oil leak(s).
NOTE:RH intermediate shaft oil seal shown; LH halfshaft oil seal similar.

Removal

1. Remove the RH intermediate shaft or LH halfshaft. See  See: Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and Repair/Front

Axle / Front Drive Halfshafts Removal/Installation or  See: Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and Repair/Front Axle
/ Intermediate Shaft Removal/Installation.

Seals and Gaskets, M/T|Service and Repair|Page 4457 > < Reverse Idler Gear|Service and Repair|Page 4453