mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Air Bag Deactivation Indicator|Description and Operation|Page 6451 > < Air Bag Deactivation Indicator|Description and Operation
Page 1
background image

Air Bag Deactivation Indicator: Service and Repair

PASSENGER AIR BAG DEACTIVATION (PAD) INDICATOR REMOVAL/INSTALLATION

WARNING:

-

Always wear safety glasses when repairing an air bag supplemental restraint system (SRS) vehicle and when handling an air bag module.
This will reduce the risk of injury in the event of an accidental deployment.

-

To reduce the risk of personal injury, do not use any memory saver devices.

NOTE:

-

The air bag warning indicator illuminates when the restraints control module (RCM) fuse is removed and the ignition switch is ON. This is normal
operation and does not indicate a supplemental restraint system (SRS) fault.

-

Repair is made by installing a new part only. If the new part does not correct the condition, install the original part and carry out the diagnostic
procedure again.

-

The supplemental restraint system (SRS) must be fully operational and free of faults before releasing the vehicle to the customer.

-

The passenger air bag deactivation indicator is part of the upper I/P center finish panel.

1. Depower the system. See SUPPLEMENTAL RESTRAINT SYSTEM (SRS) DEPOWERING AND REPOWERING.

Air Bag Deactivation Indicator|Description and Operation|Page 6451 > < Air Bag Deactivation Indicator|Description and Operation