Tribute 2WD V6-3.0L (2008)
Note
^
Keep the strap parallel with the wheel flange while tightening the worm gear.
6. Install the tire onto the wheel.
Caution
^
The sensor, cradle and strap can be damaged by incorrect tire mounting or dismounting. Mount the tire only as instructed.
7. Train the tire pressure sensor(s). See TIRE PRESSURE MONITORING SYSTEM (TPMS) SENSOR TRAINING. See: Procedures
Note
^
A new tire pressure sensor is shipped in an OFF mode (or battery saver mode) and must be turned ON before it can be trained. To turn the
sensor ON, inflate the tire to the recommended inflation pressure and wait at least 2 minutes, then continue with the sensor training procedure.