Tribute 2WD V6-3.0L (2008)
Alignment: Service and Repair
Front Wheel Alignment
Front Toe Adjustment
FRONT TOE ADJUSTMENT
1. Start the engine and center the steering wheel.
2. Turn the engine off. Hold the steering wheel in the straight-ahead position using a suitable holding device.
3. Check the toe settings following the equipment manufacturer's instructions.
4. Remove the steering gear bellows clamp(s).
Note
^
Do not allow the steering gear bellows to twist when the front wheel spindle tie-rod is rotated.
5. Loosen the tie-rod end jam nut(s).
^
Clean and lubricate the nut(s) and front wheel spindle tie-rod threads.
6. Rotate the front wheel spindle tie-rods to increase or decrease the front toe.