mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Pressure Regulating Solenoid, A/T|Specifications|Page 3701 > < Diagram Information and Instructions|Page 3694
Page 1
background image

Pressure Regulating Solenoid: Specifications

Solenoid Operation Chart

Solenoid Operation Chart (Part 1)

Solenoid Operation Chart (Part 2)

a. Not allowed by hydraulics. 
b. PCM commanded. 
c. When a manual pull-in occurs above a calibrated speed, the transaxle does not downshift from the higher gear until the vehicle speed drops below
this calibrated speed.

Shift Solenoid Failure Mode Chart "Always OFF"

Failed OFF due to PCM and/or vehicle wiring concerns, and/or solenoid electrically stuck off, and/or hydraulically or mechanically stuck off.

a. Overdrive canceled. 
b. When a manual pull-in occurs above a calibrated speed, the transaxle does not downshift from the higher gear until the vehicle speed drops below
this calibrated speed.

Pressure Regulating Solenoid, A/T|Specifications|Page 3701 > < Diagram Information and Instructions|Page 3694