Workshop Manuals Factory service & repair Mazda
01 Relays and Modules02 Sensors and Switches03 Maintenance04 Engine, Cooling and Exhaust05 Powertrain Management06 Transmission and Drivetrain07 Brakes and Traction Control08 Starting and Charging09 Power and Ground Distribution10 Steering and Suspension11 Heating and Air Conditioning12 Restraint Systems13 Accessories and Optional Equipment14 Body and Frame15 Cruise Control16 Instrument Panel, Gauges and Warning Indicators17 Lighting and Horns18 Windows and Glass19 Wiper and Washer Systems
Mazda Tribute 2WD V6-3.0L (2008)18 · Windows and Glass
18 · Body & interior

Windshield: Service and Repair

Make
Mazda
Model
Tribute 2WD
Engine
V6-3.0L
Year
2008
Section
Windshield › Service and Repair
Windows and GlassService and Repair · page 1 of 4
background image

Windshield: Service and Repair

WINDSHIELD GLASS REMOVAL/INSTALLATION

Removal

WARNING:

-

Always wear eye protection when servicing a vehicle. Failure to follow this instruction may result in serious personal injury.

-

Wear protective gloves when handling components or parts that have pointed or sharp edges. Failure to follow this instruction may result
in serious personal injury.

1. Remove the LH and RH A-pillar trim panels.
2. Remove the 2 windshield side garnish mouldings.

3. Open the front overhead console door, remove the 2 screws and the overhead console

-

If equipped, disconnect the electrical connector.

4. Remove the interior rear view mirror.
5. Remove the LH and RH sun visors and visor clips.

Pinch or Ctrl + scroll to zoom. Double-tap to reset.

Parts & tools for this job For 2008 Mazda Tribute 3.0L

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.