Tribute 4WD L4-2.3L Hybrid (2008)
Hood Latch Release: Service and Repair
HOOD LATCH RELEASE HANDLE REMOVAL/INSTALLATION
1. Remove the hood latch. See See: Hood Latch/Service and Repair.
2. Disconnect the 3 hood latch release handle cable guides.
-
Note the routing of the hood latch release cable.
3. Remove the hood latch release handle bolt.
-
To install, tighten to 11 Nm {1.1 kgf-m, 97 in-lbf}.
4. Using a suitable tool, push up on the tab to snap it off and then slide the handle off the instrument panel.
NOTE: Breaking the tab does not require handle assembly replacement.