Tribute 4WD L4-2.3L Hybrid (2008)
Front Fender: Service and Repair
Fender Splash Shield Removal/Installation
FENDER SPLASH SHIELD REMOVAL/INSTALLATION
1. Remove the 3 fender splash shield bolts.
-
To install, tighten to 5 Nm {0.5 kgf-m, 44 in-lbf}.
2. Remove the 7 fender splash shield pin-type retainers.
3. Remove the 6 fender splash shield screws.
-
To install, tighten to 5 Nm {0.5 kgf-m, 44 in-lbf}.
4. Remove the fender splash shield.
5. To install, reverse the removal procedure.