Tribute 4WD L4-2.3L Hybrid (2008)
This is the time required for the RCM to complete the testing of the SRS. If the air bag indicator is inoperative and a SRS fault exists, a chime
will sound in a pattern of 5 sets of 5 beeps. If this occurs, the air bag indicator and any SRS fault discovered must be diagnosed and repaired.
-
Clear all RCM and OCS module DTCs using a scan tool.
Rear Seat Cushion Cover Removal/Installation
REAR SEAT CUSHION COVER REMOVAL/INSTALLATION
1. Remove the rear seat cushion.
-
Position the seat cushion forward.
-
Release the locking tab and slide the rear seat cushion outward.
2. Unzip the cushion trim cover zipper.
CAUTION: Use care when separating the seat cushion trim cover from the hook-and-loop strips or the hook-and-loop strips may be torn from the seat
cushion foam pad.
3. Invert and remove the cushion trim cover.
4. To install, reverse the removal procedure.
-
Make sure the safety belts and buckles are accessible to the occupants after installation.