Tribute 4WD L4-2.3L Hybrid (2008)
Parking Brake Cable: Removal and Replacement
Parking Brake Cable - Front Removal/Installation
-
PARKING BRAKE CABLE - FRONT REMOVAL/INSTALLATION
1. With the vehicle in NEUTRAL, position it on a hoist. See See: Maintenance/Vehicle Lifting/Service and Repair/Lifting.
2. Remove the parking brake control. See See: Parking Brake Control/Service and Repair.
3. Remove the floor console. See See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair.
4. Remove the driver side front seat. See See: Body and Frame/Seats/Service and Repair.
5. Remove the 3 front parking brake cable bracket bolts.
-
To install, tighten to 23 Nm {2.3 kgf-m, 17 ft-lbf}.