Tribute 4WD L4-2.3L Hybrid (2008)
5. Disconnect the lower radiator hose at the thermostat housing.
6. Remove the 3 bolts, thermostat housing and gasket.
-
To install, tighten to 10 Nm {1.0 kgf-m, 89 in-lbf}.
7. To install, reverse the removal procedure.
-
Clean and inspect the gasket, install a new gasket if necessary.
8. Fill and bleed the cooling system. See - See: Coolant/Service and Repair/Removal and Replacement.
