Tribute 4WD L4-2.3L Hybrid (2008)
-
To install, tighten to 47 Nm {4.8 kgf-m, 35 ft-lbf}.
5. Remove the 2 bolts and position the motor electronics coolant pump and ground strap aside.
-
To install, tighten to 20 Nm {2.0 kgf-m, 14.7 ft-lbf}.
6. Remove and discard the oil level indicator tube O-ring seal.
7. To install, reverse the removal procedure.
-
Lubricate a new O-ring seal with clean engine oil.
