Tribute 4WD L4-2.3L Hybrid (2008)
c. Tighten the bolt to 6 Nm {0.6 kgf-m, 53 in-lbf}
5. Install the A/C compressor pulley.
a. Install the special tool.
b. Install the A/C compressor pulley.
NOTE: The A/C compressor pulley is a tight fit on the A/C compressor. It must be correctly aligned during installation.
6. Install the A/C compressor pulley snap ring with the bevel side out.
7. Place one nominal thickness A/C clutch disc and hub spacer inside the clutch hub spline opening.
8. Install the A/C clutch disc and hub.
9. Using the special tool, install the A/C compressor clutch disc and hub nut.
a. Hold the A/C clutch disc and hub with the special tool.
b. Tighten the bolt to 26 Nm {2.6 kgf-m, 19 ft-lbf}