Tribute 4WD L4-2.3L Hybrid (2008)
1. See the compass calibration zone map to select the correct compass zone setting for the geographic location of the vehicle.
2. With the key in the ON position, press and hold the MODE button (for approximately 5 seconds) until the display shows the current zone setting.
Release the MODE button.
3. Before the zone setting mode turns off (within 5 seconds), momentarily press and release the MODE button to increase the zone increment by one.
Set the zone display number to match the vehicle geographical location on the compass calibration zone map.
NOTE: After approximately 5 seconds, the compass display will exit the zone setting mode after the button has been released.
4. Release the switch for 5 seconds to exit the zone setting mode.
