Tribute 4WD L4-2.3L Hybrid (2008)
Hazard Warning Lamps: Description and Operation
TURN SIGNAL/HAZARD LAMPS
The front turn signal lamps are located within the headlamp assemblies. The rear lamps share functionality with the stoplamps. When the multifunction
switch is placed in the LH or RH TURN positions, the SJB cycles the voltage on and off approximately 80 times per minute. If a front or rear turn bulb is
inoperative, the SJB cycles the voltage on and off approximately 160 times per minute.
The hazard switch is located on the center instrument panel finish panel. When the hazard switch is pressed, the SJB cycles the voltage to all the turn
lamps on and off approximately 80 times per minute.
