Tribute 4WD L4-2.3L Hybrid (2008)
1. Remove the evaporative emissions canister assembly. See - See: Service and Repair.
2. Disconnect the EVAP canister vent solenoid electrical connector.
3. Disconnect the fuel vapor tube from the EVAP canister vent solenoid.
4. Remove the EVAP canister vent solenoid from the EVAP carbon canister.
5. To install, reverse the removal procedure.
-
Apply clean engine oil to the EVAP canister vent solenoid O-ring prior to installation.
-
Carry out the evaporative emission system leak test. See See: Testing and Inspection/Component Tests and General Diagnostics.