Tribute 4WD L4-2.3L Hybrid (2008)
11.
Remove the vent line from the dust separator attached to the canister assembly and clear out the line using compressed air.
12.
Inspect the dust separator for water/moisture or any obstruction.
-
If water/moisture or obstructions are present, proceed to the "Pinpoint Test: Slow to Fuel" below.
-
If no water/moisture or obstructions are present, reattach vent line to dust separator and continue to Step 13.
PINPOINT TEST: SLOW TO FILL
Normal Operation
Under normal operation, fuel should flow at a steady rate through the fuel tank filler pipe into the fuel tank. As fuel enters the fuel tank, air is
vented through the filler pipe or the on-board refueling vapor recovery (ORVR) system.