mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Driver Air Bag Module Removal/Installation|Page 4359 > < Driver Air Bag Module Removal/Installation
Page 2
background image

personal injury or death.

NOTE: The air bag warning indicator illuminates when the restraints control module (RCM) fuse is removed and the ignition switch is ON. This is
normal operation and does not indicate a supplemental restraint system (SRS) fault.

NOTE: The supplemental restraint system (SRS) must be fully operational and free of faults before releasing the vehicle to the customer.

NOTE: Repair is made by installing a new part only. If the new part does not correct the condition, install the original part and carry out the diagnostic
procedure again. 

1. Depower the system. See  See: Air Bag(s) Arming and Disarming/Service and Repair/Supplemental Restraint System (SRS) Depowering And

Repowering.

2. Using a 3-mm Allen wrench or a suitable tool, place it in the driver air bag module release hole on the underside of the steering wheel.

Driver Air Bag Module Removal/Installation|Page 4359 > < Driver Air Bag Module Removal/Installation