Tribute 4WD L4-2.3L Hybrid (2008)
2. Pull and remove the manual lumbar knob.
All seats
1. Release the seat backrest trim cover J-clip.
2. Place a hand between the seat backrest trim cover and the seat backrest foam pad and carefully separate the hook-and-loop strips.
CAUTION: Use care when separating the seat backrest trim cover from the hook-and-loop strip. The hook-and-loop strip can be torn from the seat
backrest foam pad. Failure to follow this instruction may result in component damage and/or system failure.
3. Carefully roll up the seat back trim cover in an inside out fashion to the side air bag module.