Tribute 4WD L4-2.3L Hybrid (2008)
12. Install the remaining 2 safety canopy module bolts near the ignitor {between the C and D-pillars}.
-
Tighten to 8 Nm {0.8 kgf-m, 71 in-lbf}.
13. Install the headliner. See See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair.
14. Repower the system. See See: Air Bag(s) Arming and Disarming/Service and Repair/Supplemental Restraint System (SRS) Depowering And
Repowering.
