Tribute 4WD L4-2.3L Hybrid (2008)
3. Remove the driver seat. See See: Body and Frame/Seats/Description and Operation/Seats.
4. Disconnect the seat position sensor electrical connector.
5. Push apart the 2 tabs, then push inward to release the seat position sensor locking clip.
6. Slide the seat position sensor forward to release the 2 hooks from the bracket. Then remove the seat position sensor
7. To install, reverse the removal procedure.
8. Repower the system. See See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Air Bag(s) Arming and Disarming/Service
and Repair/Supplemental Restraint System (SRS) Depowering And Repowering.