Tribute 4WD L4-2.3L Hybrid (2008)
1. Using the special tool, install the inner input seal.
2. Install the helical gears.
a. Install the drive gear. Use a slight rotation to prevent damaging the inner input seal.
b. Install the idler gear.
c. Install the driven gear.
CAUTION: Make sure not to roll the inner input seal sealing lip when installing the drive gear.
3. Apply a 3 mm (0.11 in) bead of silicone sealant to the sealing surface of the PTU cover. Install the PTU cover and tighten the 11 PTU cover bolts
in a star pattern.
-
Tighten to 32 Nm {3.2 kgf-m, 24 ft-lbf}.
CAUTION: The PTU cover and case sealing surfaces must be free of oil before applying new sealant.
4. Install the PTU vent tube and the 2 PTU vent tube bolts.
-
Tighten to 14 Nm {1.4 kgf-m, 124 in-lbf}.