Tribute 4WD L4-2.5L Hybrid (2009)
Antenna Cable: Service and Repair
Antenna Cable - AM/FM Removal/Installation
-
ANTENNA CABLE - AM/FM REMOVAL/INSTALLATION
NOTE:View shown from behind instrument panel for clarity.
1. Remove the audio control module (ACM). See See: Radio, Stereo, and Compact Disc/Service and Repair/Removal and Replacement.
2. Disconnect the AM/FM antenna cable from the AM/FM antenna.
3. Release the AM/FM antenna cable pin-type retainers.
NOTE:Lower the glove compartment completely to access the pin-type retainers.
4. Remove the AM/FM antenna cable.
5. To install, reverse the removal procedure.