Tribute 4WD L4-2.5L Hybrid (2009)
a. Slide the spring retainer to the end of the socket.
b. Disconnect the socket from the ball stud.
NOTE:An assistant may be needed to carry out this step.
6. Remove the 2 liftgate glass hinge nuts and the liftgate glass.
-
To install, tighten to 7 Nm {0.7 kgf-m, 62 in-lbf}.
NOTE:An assistant may be needed to carry out this step.
7. To install, reverse the removal procedure.
-
Transfer components as necessary.
