Tribute 4WD L4-2.5L Hybrid (2009)
Trunk / Liftgate Latch: Service and Repair
Liftgate Latch Removal/Installation
LIFTGATE LATCH REMOVAL/INSTALLATION
1. Remove the liftgate trim panel. See .
2. Disconnect the liftgate latch electrical connectors.
3. Remove and discard the 3 liftgate latch bolts.
-
To install, tighten to 12 Nm {1.2 kgf-m, 106 in-lbf}.
4. Remove the liftgate latch.
5. To install, reverse the removal procedure.
-
Lubricate the liftgate latch to striker surfaces after installation.