Tribute 4WD L4-2.5L Hybrid (2009)
1. Position the RH rear seat backrest in the vehicle.
2. Install the inboard backrest-to-floor nut and inboard backrest-to-floor bolt.
-
Tighten to 40 Nm {4.0kgf-m, 30 ft-lbf}.
3. Install the bolt cover.
4. Install the RH outboard backrest-to-floor nut.
-
Tighten to 40 Nm {4.0 kgf-m, 30 ft-lbf}.
Both Rear Seat Backrests
1. Tighten the LH outboard backrest-to-floor nut.
-
Tighten to 40 Nm {4.0 kgf-m, 30 ft-lbf}.
2. Position the carpet and install the 2 pin-type retainers.
3. Position upward and latch both rear backrests.
4. Install the LH outboard backrest-to-floor bolt.
-
Tighten to 40 Nm {4.0 kgf-m, 30 ft-lbf}.