Tribute 4WD L4-2.5L Hybrid (2009)
1. Release the backrest trim cover J-clip.
2. Partially invert the backrest trim cover up to the side air bag.
-
Place a hand between the seat backrest trim cover and the seat backrest foam pad and carefully separate the hook-and-loop strips.
CAUTION:Use care when separating the seat backrest trim cover from the hook-and-loop strips or the hook-and-loop strips may be torn from the seat
backrest foam.
3. Release the side air bag module deployment chute J-clip from around the side air bag module.
