Tribute 4WD L4-2.5L Hybrid (2009)
WARNING:If the seat side air bag cover has been damaged or separated from its mounting, or if the air bag material has been exposed, install a new
seat side air bag module. Never try to repair the seat side air bag module. Failure to follow these instructions may result in the seat side air bag deploying
incorrectly, which increases the risk of serious personal injury or death in a crash.
CAUTION:Make sure the side air bag module wiring harness is not pinched between the side air bag module and the mounting bracket. Damage to the
wire harness may occur.
Seats with lumbar adjust
1. Install the lumbar support assembly to the backrest frame wires.
2. Install the lumbar adjust control and 2 screws.
All seats
1. Install the side air bag module and 2 nuts to the backrest frame mounting bracket.
-
Tighten to 5 Nm {0.5 kgf-m, 44 in-lbf}.
2. Position the side air bag module wiring harness to the backrest frame and attach the retainers.
3. Install the backrest foam pad to the backrest frame.
4. Position and roll the backrest trim cover down the backrest to the side air bag module.
