Tribute 4WD L4-2.5L Hybrid (2009)
1. Remove the rear seat cushion.
-
Position the seat cushion forward.
-
Release the locking tab and slide the rear seat cushion outward.
2. Unzip the cushion trim cover zipper.
CAUTION:Use care when separating the seat cushion trim cover from the hook-and-loop strips or the hook-and-loop strips may be torn from the seat
cushion foam pad.
3. Invert and remove the cushion trim cover.
4. To install, reverse the removal procedure.
-
Make sure the safety belts and buckles are accessible to the occupants after installation.