Tribute 4WD L4-2.5L Hybrid (2009)
-
To install, tighten to 6 Nm {0.6 kgf-m, 53 in-lbf}.
7. Remove the 2 A/C condenser-to-radiator bolts and position aside the A/C condenser from the radiator.
-
To install, tighten to 10 Nm {1.0 kgf-m, 89 in-lbf}.
8. Disconnect the lower radiator hose from the radiator.
9. Disconnect the degas bottle return hose from the radiator.
10. Disconnect the engine coolant vent hose from the radiator.
11. Disconnect the upper radiator hose from the radiator.
12. Remove the radiator.
13. To install, reverse the removal procedure.
14. Fill and bleed the cooling system. See - See: Coolant/Service and Repair/Removal and Replacement.