Tribute 4WD L4-2.5L Hybrid (2009)
Thermostat Bypass Hose: Service and Repair
-
BYPASS TUBE REMOVAL/INSTALLATION - HYBRID
1. With the vehicle in NEUTRAL, position it on a hoist. See See: Maintenance/Vehicle Lifting/Service and Repair/Lifting.
2. Drain the cooling system. See - See: Coolant/Service and Repair/Removal and Replacement.
3. Remove the intake manifold. See - See: Engine/Intake Manifold/Service and Repair.
4. Disconnect and remove the coolant bypass tube.
5. To install, reverse the removal procedure.
6. Fill and bleed the cooling system. See - See: Coolant/Service and Repair/Removal and Replacement.
