Tribute 4WD L4-2.5L Hybrid (2009)
Drive Belt Tensioner: Service and Repair
-
ACCESSORY DRIVE BELT TENSIONER - HYBRID REMOVAL/INSTALLATION
1. Rotate the accessory drive belt tensioner counterclockwise and remove the accessory drive belt from the tensioner pulley.
2. Remove the 3 bolts and the accessory drive belt tensioner.
-
To install, tighten to 25 Nm {2.5 kgf-m, 18 ft-lbf}.
NOTE:The accessory drive belt tensioner must be replaced as a complete unit.
3. To install, reverse the removal procedure.