Tribute 4WD L4-2.5L Hybrid (2009)
![background image](/mazda/tribute_4wd/l4-2.5l_hybrid/Page-350001.png)
Oil Pick Up/Strainer: Service and Repair
-
OIL PUMP SCREEN AND PICKUP TUBE REMOVAL/INSTALLATION - HYBRID
1. With the vehicle in NEUTRAL, position it on a hoist. See See: Maintenance/Vehicle Lifting/Service and Repair/Lifting.
2. Remove the oil pan. See - See: Diagrams and - See: Oil Pan/Service and Repair.
3. Remove the 2 bolts and oil pump screen cover and tube.
-
To install, tighten to 10 Nm {1.0 kgf-m, 89 in-lbf}.
NOTE:Discard the gasket and inspect the gasket mating surfaces.
4. To install, reverse the removal procedure.