Tribute 4WD L4-2.5L Hybrid (2009)
3. Remove the crankshaft pulley. See - See: Cylinder Block Assembly/Harmonic Balancer - Crankshaft Pulley/Service and Repair.
4. Remove the engine mount. See - See: Drive Belts, Mounts, Brackets and Accessories/Engine Mount/Service and Repair/Removal and
Replacement.
5. Using the special tool, remove the crankshaft front oil seal.
CAUTION:Use care not to damage the engine front cover or the crankshaft when removing the seal.
6. Remove the 3 bolts and the coolant pump pulley.
7. Disconnect the crankshaft position (CKP) sensor electrical connector.
8. Remove the 2 bolts and the CKP sensor.
