Tribute 4WD L4-2.5L Hybrid (2009)
2. Open and lower the glove compartment door to gain access to the passenger air bag deactivation (PAD) indicator electrical connector.
-
Disconnect the PAD indicator electrical connector.
3. Pull out to release the retaining clips and detach the I/P upper center finish panel.
4. To install, reverse the removal procedure.
5. Repower the system. See See: Dashboard / Instrument Panel/Air Bag(s) Arming and Disarming/Service and Repair/Supplemental Restraint
System (SRS) Depowering And Repowering.