Tribute 4WD L4-2.5L Hybrid (2009)
5. Disconnect the quick connect coupling from the tube.
-
Push the locking mechanism outward and separate the quick connect coupling from the tube.
NOTE:When reusing liquid or vapor tube connectors, make sure to use compressed air to remove any foreign material from the connector retaining clip
area before separating from the tube.
Connect - Type III
1. Install the quick connect coupling onto the tube until fully seated.
NOTE:Make sure the tube clicks into place when installing into the quick connect coupling. To make sure the tube is fully seated, pull on the tube.
NOTE:Apply clean engine oil to the end of the tube and the quick connect coupling O-ring seals.
