Tribute 4WD L4-2.5L Hybrid (2009)
Resonator: Service and Repair
-
AIR INTAKE RESONATOR REMOVAL/INSTALLATION - HYBRID
1. With the vehicle in NEUTRAL, position it on a hoist. See See: Maintenance/Vehicle Lifting/Service and Repair/Lifting.
2. Remove the LF wheel and tire.
3. Remove the 9 fasteners and position aside the LH fender splash shield.
4. Remove the bolt and air intake resonator.
-
To install, tighten to 8 Nm {0.8 kgf-m, 71 in-lbf}.
5. To install, reverse the removal procedure.
NOTE:Make sure that the front rubber grommet is seated in the bracket.
