Tribute 4WD L4-2.5L Hybrid (2009)
3. Hook the safety canopy module to the C-pillar.
4. Install the 2 safety canopy module bolts located near the top of the A and B-pillars.
-
Tighten to 8 Nm {0.8 kgf-m, 71 in-lbf}.
5. Attach the A-pillar tether pin-type retainer to the A-pillar.
6. Install the A-pillar tether bolt.
-
Tighten to 8 Nm {0.8 kgf-m, 71 in-lbf}.
NOTE:If equipped with a moonroof and/or rear window wiper assembly, do not pinch the front moonroof drain hose and/or rear window washer solvent
hose.
7. Install the 2 safety canopy module bolts near the top of the C-pillar and between the B and C-pillars.
-
Tighten to 8 Nm {0.8 kgf-m, 71 in-lbf}.
8. If the vehicle is equipped with a rear window wiper assembly, position the hose and attach the hose clips.