mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Clockspring Assembly / Spiral Cable, Air Bag|Service and Repair|Page 5019 > < Air Bag Deactivation Indicator|Service and Repair|Page 5015
Page 1
background image

Clockspring Assembly / Spiral Cable: Service and Repair

CLOCKSPRING REMOVAL/INSTALLATION

Removal

WARNING:To reduce the risk of accidental deployment, do not use any memory saver devices. Failure to follow this instruction may result in serious
personal injury or death.
NOTE:The air bag warning lamp illuminates when the restraints control module (RCM) fuse is removed and the ignition switch is ON. This is normal
operation and does not indicate a SRS fault.
NOTE:The SRS must be fully operational and free of faults before releasing the vehicle to the customer.
NOTE:Repair is made by installing a new part only. If the new part does not correct the condition, install the original part and carry out the diagnostic
procedure again. 

1. Depower the system. See  See: Air Bag(s) Arming and Disarming/Service and Repair/Supplemental Restraint System (SRS) Depowering And

Repowering.

Clockspring Assembly / Spiral Cable, Air Bag|Service and Repair|Page 5019 > < Air Bag Deactivation Indicator|Service and Repair|Page 5015