Tribute 4WD L4-2.5L Hybrid (2009)
2. Remove the passenger seat. See See: Body and Frame/Seats/Service and Repair.
3. Disconnect the electrical connectors and wiring clips.
a. Disconnect the OCS ECU electrical connector.
b. Disconnect the pressure sensor electrical connector.
c. Release the 2 wiring clips on the wiring harness from the cushion pan.
d. If equipped with heated seats, disconnect the heated seat module electrical connector, release the wiring clip on the wiring harness from the
cushion pan, and disconnect the two cushion element electrical connectors.
4. Remove the 4 seat cushion bolts retaining the seat cushion to the seat track.
5. Remove the seat cushion and pan assembly.
-
To aid in removal, recline the seat.
CAUTION:While positioning the seat cushion pan and occupant classification sensor assembly, be careful not to damage any of the components. Failure
to do so can result in component failure.