Tribute 4WD L4-2.5L Hybrid (2009)
2. Remove the safety belt retractor pretensioner bolt.
-
To install, tighten to 48 Nm {4.8 kgf-m, 35 ft-lbf}.
3. Disconnect the safety belt retractor pretensioner electrical connector.
4. Unhook and remove the safety belt retractor pretensioner.
-
To install, tighten to 48 Nm {4.8 kgf-m, 35 ft-lbf}.
5. To install, reverse the removal procedure.
6. Repower the supplemental restraint system (SRS). See See: Air Bag(s) Arming and Disarming/Service and Repair/Supplemental Restraint System
(SRS) Depowering And Repowering.
7. Check the active restraint system for correct operation. See - See: Description and Operation.