Tribute 4WD L4-2.5L Hybrid (2009)
![background image](/mazda/tribute_4wd/l4-2.5l_hybrid/Page-965001.png)
Alignment: Service and Repair
Ride Height Measurement
RIDE HEIGHT MEASUREMENT
Front
NOTE:Make sure that the vehicle is positioned on a flat, level surface and the tires are inflated to the correct pressure. Vehicle should have a full tank of
fuel.
1. Position a suitable surface gauge (such as Starrett 57D Surface Gauge), on a flat, level surface and adjust the gauge's arm until the scriber point is
located in the center of the lower ball joint.
-
Lock the surface gauge in this position.